Publications

International journal papers (* Corresponding author)

IJ13 Tondini N.*, Franssen J.-M. (2017) Analysis of experimental hydrocarbon localised fires with and without engulfed steel members, Fire Safety Journal, 92:9–22.

IJ12 Phan N.H., Paolacci F., Bursi O.S. and Tondini N. (2017) Seismic fragility analysis of elevated steel storage tanks supported by reinforced concrete columns, Loss Prevention in the Process Industries, 47:57-65.

IJ11 Tondini N.*, Morbioli A., Vassart O., Lechêne S., Franssen J.-M. (2016) An integrated modelling strategy between FDS and SAFIR: Methodology and application, Journal of Structural Fire Engineering, 7 (3), 217-233.

IJ10 Bursi O.S.; Paolacci F.; Reza M.S.; Alessandri S.; Tondini N. (2016) Seismic Assessment of Petrochemical Piping Systems Using a Performance-Based Approach, Journal of Pressure Vessel Technology, 138(3):031801-031801-10, doi: 10.1115/1.4032111.

IJ9 Bursi O.S., Tondini N.*, Bonelli A. and Fassin M. (2015) Structural monitoring for the cyclic behaviour of concrete tunnel lining sections using FBG sensors, Structural Control and Health Monitoring, doi: 10.1002/stc.1807.

IJ8 Tondini N.* and Morbioli A. (2015) Cross-sectional flexural capacity of cold-formed laterally-restrained steel rectangular hollow flange beams, Thin-Walled Structures, 95:196-207, dx.doi.org/10.1016/j.tws.2015.06.018.

IJ7 Tondini N.*, Bursi O.S., Bonelli A. and Fassin M. (2015) Capabilities of a FBG sensor system to monitor the inelastic response of concrete sections in new tunnel linings subjected to earthquake loading, Computer-Aided Civil and Infrastructure Engineering, 30(8): 636–653, doi: 10.1111/mice.12106.

IJ6 Pucinotti R., Tondini N., Zanon G. and Bursi O.S. (2015) Tests and model calibration of high-strength steel tubular beam-to-column and column-base composite joints for moment-resisting structures, Earthquake Engineering & Structural Dynamics, 44:1471–1493, doi: 10.1002/eqe.2547.

IJ5 Tondini N.*, Rossi B. and Franssen J.-M. (2013) Experimental investigation on ferritic stainless steel columns in fire. Fire Safety Journal, 62: Part C, 238-248, dx.doi.org/10.1016/j.firesaf.2013.09.026.

IJ4 Tondini N.*, Hoang V.L., Demonceau J.-F. and Franssen J.-M. (2013) Experimental and numerical investigation of high-strength steel circular columns subjected to fire loading. Journal of Constructional Steel Research, 80: 57-81, dx.doi.org/10.1016/j.jcsr.2012.09.001.

IJ3 Tondini N.* and Stojadinovic B. (2012) Probabilistic seismic demand model for curved reinforced concrete bridges. Bulletin of Earthquake Engineering, 10(5): 1455-1479, doi 10.1007/s10518-012-9362-y.

IJ2 Ceravolo R., Tondini N.*, Abbiati G. and Kumar A. (2012) Dynamic characterization of complex bridge structures with passive control systems. Structural Control and Health Monitoring, 19(4): 511–534. doi: 10.1002/stc.450.

IJ1 Bursi O.S., Stoten D. P., Tondini N., Vulcan L. (2010) Stability and accuracy by numerical methods of a model reference adaptive controller applied to systems without and with time delay. International Journal in Numerical Methods in Engineering, 82(9):1158–1179. doi: 10.1002/nme.2805.

National journal papers (* Corresponding author)

NJ4 Pucinotti R., Tondini N. and Zanon G. (2013) Seismic performance of joints with high strength columns. Rivista Italiana della Saldatura No. 2 (Article published on Costruzione Metalliche No. 2 - 2012).

NJ3 Tondini N.* and Franssen J.-M. (2012) Development of an interface between a CFD software and a FE software for compartment fires. Costruzioni Metalliche, No.3.

NJ2 Pucinotti R., Tondini N. and Zanon G. (2012) Seismic performance of joints with high strength columns. Costruzioni Metalliche, No. 2.

NJ1 Tondini N.*, Bonelli A., Santini S. and Dusatti T. (2011) Dynamic behaviour of steel footbridges: the “Ponte del mare”case study. Costruzioni Metalliche, No.1.

Book chapters

B1 Bursi O.S., Ferrario F, Pucinotti R., Tondini N. and Zandonini R. (2011) Test and analysis of structures and joints for steel-concrete moment-resisting frames and steel-concrete box-girder bridges, in the development of innovative approaches for the design of steel and composite steel-concrete structural systems, the line 5 of the RELUIS-DPC 2005-2008 project. Mazzolani F.M. and Zandonini R., Editors. Doppiavoce, Napoli.

Conference papers (* Presenting the paper at the conference)

C40 Tondini N.* and Demonceau J.-F. (2017) Numerical analysis of the fire resistance of high-strength steel circular columns, Proceedings of 8th European Conference on Steel and Composite Structures, Copenhagen, Denmark, 13–15 September.

C39 Tondini N.*, Morbioli M. and Battini J.-M. (2017) A 2D beam element for the analysis of flexural buckling of steel structures at elevated temperatures, Applications of Structural Fire Engineering, Manchester, UK, 7-8 September.

C38 Morbioli M., Tondini N. and Battini J.-M. (2017) A co-rotational nonlinear two dimensional beam element for the analysis of steel structures subjected to fire loading, Proceedings of the IFireSS2017 Symposium, Naples, Italy, 7-9 June.

C37 Abbiati G., Tondini N., Possidente L., Stojadinovic B. (2017) Hybrid fire testing up to collapse combining static and dynamic FETI algorithms: numerical framework formulation, 16th WCEE, Santiago de Chile, Chile, 9-13 January.

C36 Tondini N.*, Abbiati G., Possidente L. and Stojadinovic B. (2016) Hybrid simulation applied to fire testing: a newly-conceived static solver, Proceedings of the 6th European Conference on Structural Control, Sheffield, UK, 11-13 July.

C35 Sauca A., Gernay T., Robert F., Tondini N. and Franssen J.-M. (2016) A novel methodology for hybrid fire testing, Proceedings of the 6th European Conference on Structural Control, Sheffield, UK, 11-13 July.

C34 Gernay T., Salamet S., Tondini N. and Elhami Khorasani N. (2016) Urban infrastructure resilience to fire disaster: An overview, Proceedings of the World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium, Prague, Czech Repubic, 12-17 June.

C33 Tondini N.*, Thauvoye C., Hanus F. and Zhao B. (2016) Numerical calibration of hydrocarbon localised fire tests by means of Fire Dynamics Simulator, Proceedings of the 9th Conference on Structures in Fire, Princeton, NJ, USA, 8-10 June.

C32 Tondini N.*, Abbiati G., Possidente L. and Stojadinovic B. (2016) A static partitioned solver for hybrid fire testing, Proceedings of the 9th Conference on Structures in Fire, Princeton, NJ, USA, 8-10 June.

C31 Hanus F., Vassart O., Tondini N., Nadjaj A. and Franssen J.M. (2016) Temperature assessment of a vertical steel member subjected to localised fire: Experimental tests, Proceedings of the 9th Conference on Structures in Fire, Princeton, NJ, USA, 8-10 June.

C30 Sauca A., Gernay T., Robert F., Tondini N. and Franssen J.-M. (2016) Stability in hybrid fire testing, Proceedings of the 9th Conference on Structures in Fire, Princeton, NJ, USA, 8-10 June.

C29 Abbiati G., Ferraiuolo M., Tondini N. and Stojadinovic B. (2016) Fully Coupled Hybrid Simulation of Spacecraft Thermal Structures, Proceedings of 11th International Congress on Thermal Stresses, Salerno, Italy, 5-9 June.

C28 Morbioli M., Tondini N. and Battini J.-M. (2016) A co-rotational nonlinear three dimensional beam element for the analysis of steel structures subjected to fire, European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS, Crete, Greece, 5-10 June.

C27 Morbioli M., Tondini N. (2015) Numerical analysis of cold formed laterally-restrained steel rectangular hollow flanges beams, Proceedings of the XXV Giornate Italiane della Costruzione in Acciaio, Salerno, Italy, 1-3 October. 

C26 Tondini N.*, Hanus F., Nadjai A. and Franssen J.-M. (2015) Analisi numerica di incendi localizzati di idrocarburi, Proceedings of the XXV Giornate Italiane della Costruzione in Acciaio, Salerno, Italy, 1-3 October. 

C25 Tondini N.*, Hanus F., Nadjai A. and Franssen J.-M. (2015) Numerical analysis of hydrocarbon pool fire tests, Proceeding of the 1st International Conference on Structural Safety under Fire & Blast, Glasgow, UK, 2-4 September.

C24 Abbiati G., Bursi O.S., Stojadinovic B., Tondini N., Whyte C. (2015) Hybrid simulation of heat transfer problems in structural applications, Proceedings of the 6th Conference on Computational Methods for Coupled Problems in Science and Engineering, Venice, Italy, 18-20 May.

C23 Tondini N.* and Morbioli A. (2014) Experimental analysis of cold-formed steel rectangular hollow flange sections, Proceedings of 7th European Conference on Steel and Composite Structures, Naples, Italy, 10-12 September.

C22 Bursi O.S., Tondini N., Sozonov P., Pucinotti R., Zanon G. (2014) Probabilistic Seismic Analysis Of A 3D Steel-Concrete Composite Structure, Proceedings of the 12th International Conference on Computational Structures Technology, Naples, Italy, 2-5 September.

C21 Tondini N.*, Morbioli A., Vassart , Lechêne S., Franssen J.M. (2014) An integrated modelling strategy between FDS and SAFIR: the analysis of the fire performance of a composite steel-concrete open car park, Proceedings of the 8th Conference on Structures in Fire, Shanghai, China, 11-13 June.

C20 Tondini N., Bursi O.S., Scardi P., D’Incau M., Zanon G. and Raso S. (2013) Mechanical properties of steel structural elements worked using the laser technology, Proceedings of the XXIV Giornate Italiane della Costruzione in Acciaio, Torino, Italy, 30 September – 2 October.

C19 Tondini N., Bursi O.S., Morbioli A., Zanon G. and Pucinotti R. (2013) Beam-to-column and column base joints made of high strength steel circular columns subjected to earthquake loading, Proceedings of the XXIV Giornate Italiane della Costruzione in Acciaio, Torino, Italy, 30 September – 2 October.

C18 Tondini N.*, Hoang V.L., Demonceau J.-F. and Franssen J.-M. (2013) Fire testing of high-strength steel circular columns in fire, Proceedings of the XXIV Giornate Italiane della Costruzione in Acciaio, Torino, Italy, 30 September – 2 October.

C17 Rossi B., Tondini N. and Franssen J.-M. (2013) Experiments on ferritic stainless steel columns in fire, Proceedings of the 5th International Conference on Structural Engineering, Mechanics and Computation SEMC 2013, Cape Town, South Africa, 2-4 September.

C16 Tondini N.*, Fassin M., Bursi O.S. and Zanon G. (2013) Experimental analysis of joints made of high strength steel tubular columns subjected to earthquake loading, Proceedings of the XV Convegno L'Ingegneria Sismica in Italia, Padova, Italy, 30 June-4 July.

C15 Tondini N.*, Bursi O.S.; Fassin M. and Zanon G. (2013) seismic behaviour of joints made of high strength steel tubular columns, HSS-SERF: High Strength Steel in Seismic Resistant Structures Workshop, Naples, Italy, 28-29 June.

C14 Tondini N.* and Franssen J.-M. (2013) Implementation of a weak coupling approach between a CFD and an FE software for fires in compartments, Proceedings of the 5th Conference on Computational Methods for Coupled Problems in Science and Engineering, Ibiza, Spain, 17-19 June.

C13 Tondini N.*, Vassart O. and Franssen J.-M. (2013) Experimental assessment of the effect of the real flame emissivity for steel elements engulfed into fire, Proceedings of the 13th International Conference on Fire and Materials, San Francisco, CA, USA, 28-30 January.

C12 Tondini N.*, Vassart O. and Franssen J.-M. (2012) Development of an interface between CFD and FE software, Proceedings of the 7th Conference on Structures in Fire, Zurich, Switzerland, 6-8 June.

C11 Tondini N.* and Franssen J.-M. (2011) Development of an integrated modelling methodology for compartment fires by implementing a weak coupling strategy between a CFD and an FE software. Proceedings of the XXIII Giornate Italiane della Costruzione In Acciaio, Ischia, Italy, 9-12 October.

C10 Bursi O.S., Pucinotti R., Tondini N. and Zanon G. (2011) Behaviour of beam-to-column joints and column bases made with high strength steel tubular columns subjected to earthquake loading. Proceedings of 6th European Conference on Steel and Composite Structures, Budapest, Hungary, 31 August – 2 September.

C9 Tondini N.*, Bonelli A., Bursi O.S. and Francescotti S. (2011) Dynamic and aeroelastic behaviour of a twin deck curved cable-stayed footbridge equipped with passive devices. Proceedings of 8th International Conference on Structural Dynamics, Leuven, Belgium, 4-6 July.

C8 Bursi O.S., Bonelli A., Ceravolo R., Tondini N. and Ussia A. (2011) Dynamic and aeroelastic behaviour of a twin deck curved cable-stayed footbridge equipped with passive devices, Proceedings of Engineering Mechanics Institute, Boston, MA, USA, 2-4 June.

C7 Bonelli A., Bursi O.S., Ceravolo R., Santini S., Tondini N.* and Zasso A. (2010) Dynamic identification and structural health monitoring of a twin deck curved cable-stayed footbridge: the “Ponte del mare” of Pescara in Italy, Proceedings of the 5th European Workshop on Structural Health Monitoring, Sorrento, Italy, 28 June – 2 July.

C6 Tondini N.*, Bursi O.S. and Stojadinovic B. (2009) Performance-based analysis of concrete and steel-concrete composite bridges, Proceedings of the 2nd Computational Structural Dynamics and Earthquake Engineering, Rhodes, Greece, 22-24 June.

C5 Bursi O.S., Bonelli A., Mammino A., Pucinotti R., Tondini N. (2008) External post-tensioning retrofitting and modelling of steel-concrete box-girder bridges, Proceedings of the 7th International Conference on Steel Bridges, Guimaraes, Portugal, 4-6 June.

C4 Terzic V., Tondini N. and Stojadinovic B. (2008) Experimental evaluation of the residual axial load capacity of circular bridge columns, 60th EERI Annual Meeting, New Orleans, LA, USA, 6-8 February.

C3 Bursi, O.S., Forte M., Mammino A., Tondini N. and Tonon E. (2007) External post-tensioning retrofit and high- and low-cycle fatigue study of connections and joints in steel-concrete box-girder bridges, Proceedings of IABSE Symposium “Improving Infrastructure", Weimar, Germany, 19-21 September.

C2 Bonelli A., Bursi O.S., Ferrario F., Pucinotti R., Tondini N., Zandonini R. (2007) On going activities of the RU 8 on the performance evaluation of steel-concrete composite joints and of steel connection details for fatigue performance of composite bridge decks. Workshop Materiali ed Approcci Innovativi per il Progetto in Zona Sismica e la Mitigazione della Vulnerabilità delle Strutture, Università degli Studi di Salerno – Consorzio RELUIS, Italy, 12-13 February.

C1 Bursi O.S., Tondini N., Vulcan L. and Stoten D.P. (2006) Analysis of a discrete first-order model reference adaptive controller discretized by the zero-order-hold discrete equivalent. Proceedings of the 4th World Conference on Structural Control and Monitoring, San Diego, CA, USA, 11-13 July.