Selected Publications

Journal Papers, Parts of Books and Books

J1 BURSI, O. and GUZZETTI, F. "Photogrammetric Survey and Definition of Failure Mechanisms of Beam-to-Column Steel Connections", Costruzioni Metalliche, No. 5, 1990, 3-30.

J2 BURSI, O. "An Experimental-Numerical Method for the Modelling of Plastic Failure Mechanisms of Extended End-plate Steel Connections", Structural Engineering Review, No. 3, 1991, 111-119.

J3 BURSI, O.S. and GERSTLE, K.H. "The Effect of Bracing Connection Deformation on the Behaviour of Steel Frames", Costruzioni Metalliche, No. 3, 1993, 149-172.

J4 SHING, P-B-, BURSI, O.S. and VANNAN, M.T. "Pseudodynamic Tests of a Concentrically Braced Frame Using Substructuring Techniques", J. Construct. Steel Research, Voi. 29 Nos. 1-3, 1994, 121-148.

J5 BURSI, O.S. "Elastic-Plastic Modelling of Structural Fasteners in Steel Bracing Connections", J. Construct. Steel Research, Vol. 30, No. 1, 1994, 13-38.

J6 BURSI, O.S., GERSTLE, K.H., SIGFUSDOTTIR A. and ZITUR. J. "Behavior and Analysis of Bracing Connections for Steel Frames", J. Construct. Steel Research, Voi. 30, No. 1, 1994, 39-60.

J7 BURSI, O.S. and GERSTLE, K.H. "Analysis of Flexibly Connected Braced Steel Frames", J. Construct. Steel Research, Voi. 30, No. 1, 1994, 61-83.

J8 BURSI, O.S.. SHING, P.B. and RADAKOVIC-GUZINA. Z. "Pseudodynamic Testing of Strain-Softening Systems with Adaptive Time Steps", Earthquake Engineering & Structural Dynamics, Voi. 23, 1994, 745-760.

J9 SHING. P.B., NAKASHIMA, M. and BURSI, O.S., "Application of Pseudodynamic Test Method to Strnctnral Research", Earthquake Spectra, Voi. 12, No. 1, 1996, 29-56.

J10 BURSI, O.S. and SHING, P.B. "Evaluation of Some Implicit Time-Stepping Algorithms for Psendodynamic Tests", Earthquake Engineering & Structural Dynamics, Voi. 25, 1996, 333-355.

J11 BURSI, O.S. and JASPART, J.P. "Benchmark for Finite Element Modelling of Bolted Steel Connections", J. Construct. Steel Research, Voi. 43, n. 1-3, 1997, 17-42.

J12 BURSI, O.S. and JASPART, J.P. "Calibration of a Finite Element Modcl for Isolated Bolted End Plate Steel Connections", J. Construct. Steel Research. Voi. 44, n. 3, 1997, 225-262.

J13 BURSI, O.S. and JASPART, J.P. "Basic Issues in the Finite Element Simulation of Extended End Piate Connections", Computers & Structures, 69, 1998, 361-382.

J14 BURSI, O.S. and ZANDONINI, R. "Quasi-Static Cyclic and Pseudo-Dynamic Tests on Composite Substructures with Softening Behaviour" selected paper in Stability and Ductility of Steel Structures, edited by Usami and Itoh,Elsevier, 1998, 119-130.

J15 BURSI, O.S. and GRAMOLA, G. "Behaviour of Headed Stud Shear Connectors under Low-cycle High Amplitude Displacements", Materiais and Structures, 32, 1999, 290-297.

J16 BURSI, O.S. and GRAMOLA, G. "Behaviour of Composite Substructures with Full and Partial Shear Connection under Quasi-Static Cyclic and Pseudo-Dynamic Displacements", Materials and Structures, 33, 2000, 154-163.

J17 DENG, C-G., BURSI, O.S. and ZANDONINI, R."A Hysteretic Connection Element and Its Applications", Computers & Structures, 78(1-3), 2000, 93-110.

J18 BURSI, O.S. “Shear Connection in Steel-concrete Members: Testing, Modelling, Standards and Seismic Damage'', Costruzioni Metalliche, 4, 2000, 51-66.

J19 BONELLI, A., BURSI, O.S. and MANCUSO, M. "Explicit Predictor-multicorrector Time Discontinuous Galerkin Methods for Linear Dynamics", Journal of Sound and Vibration, 246(4), 2001, 625-652.

J20 ERLICHER, S., BONAVENTURA, L. and BURSI, O.S. "The Analysis of the Generalized-a Method for Non-linear Dynamic Problems", Computational Mechanics, 28, 2002, 83-104.

J21 BURSI, O.S. and MANCUSO, M. "Analysis and performance of a predictor-multicorrector Time Discontinuous Galerkin method in non-linear elastodynamics", Earthquake Engineering & Structural Dynamics 31, 2002, 1793-1814.

J22 BONELLI, A., BURSI, O.S. and MANCUSO, M. "Explicit Predictor-multicorrector Time Discontinuous Galerkin Methods for Non-linear Dynamics", Journal of Sound and Vibration, 256(4), 2002, 695-724.

J23 BURSI O. S., FERRARIO F., FONTANARI V., "Non-linear Analysis of the Low-cycle Fracture Behaviour of Isolated Tee Stub Connections". Computers & Structures, 80, 2002, 2333-2360.

J24 BONELLI, A. and BURSI, O.S., "Iterative solutions for implicit Time Discontinuous Galerkin methods applied to non-linear elastodynamics". Computational Mechanics, 30, 2003, 487-498.

J25 BURSI, O.S. and FERRARIO F., " Computational Models for the Low-cycle Fatigue Behaviour of Composite Members and Joints" in Progress in Civil and Structural Engineering Computing, Edited by B.H.V. Topping, Saxe-Coburg Publications, Stirling, 119-148, 2003.

J26 BONELLI, A. and BURSI, O.S., " Generalized-alpha Methods for Seismic Structural Testing ", Earthquake Engineering & Structural Dynamics, 33, 1067-1102, 2004.

J27 BURSI, O.S., SUN F. and POSTAL, S. "Non-linear Analysis of Steel-Concrete Composite Frames with Full and Partial Shear Connection Subjected to Seismic Loads", J. Construct. Steel Research, 61, 67-92, 2005.

J28 BURSI, O.S., VULCAN L., SALVATORE W. and NARDINI L. " Identification and Control of Structural Systems" in Progress in Computational Structures Technology, Edited by B.H.V. Topping and C.A. Mota Soares, Saxe-Coburg Publications, Stirling, 171-200, 2004.

J29 SUN, F. and BURSI, O.S., "Displacement-based and two-field mixed variational formulations for composite beams with shear lag", J. of Engineering Mechanics, ASCE , 131,2, 199-210, 2005.

J30 BONELLI, A. and BURSI, O.S., " Predictor-corrector procedures for pseudo-dynamic tests ", Engineering Computations , 22, 2005, 783-834.

J31 BALDO, G., BONELLI, A., BURSI, O.S. and ERLICHER S., " The accuracy of the Generalized-alpha method in the time integration of non-linear Single- and Two-DoF forced systems", Computational Mechanics, 38, 2006, 15-31.

J32 SALVATORE, W., BURSI, O.S. and LUCCHESI D., "Design, testing and analysis of high ductile partial strength steel-concrete composite beam-to-column joints", Computers & Structures, 83, 2005, 2334-2352.

J33 BURSI, O.S., STOTEN D.P.and VULCAN L., "Convergence and frequency-domain analysis of a discrete first-order model reference adaptive controller", Structural Control and Health Monitoring , 14, 777-807, 2007.

J34 BRACONI, A., SALVATORE, W., TREMBLAY, R. and BURSI, O.S., "Behavior and modeling of partial-strength beam-to-column composite joints for seismic applications", Earthquake engineering & structural dynamics,36, 1, 2007, 142-161.

J35 ZONTA, D., POZZI, M., and BURSI, O.S., "Performance evaluation of smart prefabricated concrete elements", Smart Structures and Systems,3, 4, 2007, 475-494.

J36 ERLICHER, S. and BURSI, O.S., "Bouc-Wen-type models with stiffness degradation: thermodynamic analysis and application", Journal of engineering mechanics, 347, 2008, 331-338.

J37 BURSI, O.S., MOLINARI, M., SAVADKOOHI, A. and ZONTA, D., "Finite Element Model Updating of a Steel-Concrete Composite Moment-Resisting Structure with Partial Strength Joints", Key Engineering Materials , 347, 101-106, 2007.

J38 BURSI, O.S., GONZALEZ-BUELGA, A., VULCAN, L., NEILD S.A. and WAGG, D. J., "Novel coupling Rosenbrock-based algorithms for real-time dynamic substructure testing", Earthquake Engineering and Structural Dynamics, 37, 339-360, 2008

J39 BONELLI, A.,BURSI, O.S., HE, L., MAGONETTE, G., PEGON, P., "Convergence analysis of a parallel interfield method for heterogeneous simulations with substructuring", International Journal for Numerical Methods in Engineering, 75, 7, 2008, 800-825. 

J40 BRACONI, A., BURSI, O.S., FABBROCINO, G., SALVATORE, W., TREMBLAY, R., "Seismic performance of a 3D full-scale high-ductility steel-concrete composite moment-resisting structure - Part I: Design and testing procedure", Earthquake Engineering & Structural Dynamics , 37, 14, 2008, 1609-1634.

J41 BURSI, O.S. "Computational techniques for simulation of monolithic and heterogeneous structural dynamic systems", in Modern Testing Techniques for Structural Systems Dynamics and Control , Edited by O. S. Bursi and D. J. Wagg, CISM-Springer Wien NewYork 2008.

J42 BRACONI, A., BURSI, O.S., FABBROCINO, G., SALVATORE, W., TAUCER, F., TREMBLAY, R., "Seismic performance of a 3D full-scale high-ductile steel-concrete composite moment-resisting frame - Part II: Test results and analytical validation", Earthquake Engineering & Structural Dynamics , 37, 14, 2008, 1635-1655.

J43 Lamarche C., Bonelli A., BURSI, O.S., TREMBLAY, R., "A Rosenbrock-W method for real-time dynamic substructuring and pseudo-dynamic testing", Earthquake Engineering & Structural Dynamics , 38, 9, 2009, 1071-1092.

J44 BURSI O.S., He L., BONELLI, A., PEGON, P., "Novel generalized-alpha methods for interfield parallel integration of heterogeneous structural dynamic systems", Journal of Computational and Applied Mathematics , 234, 7, 2010, 2250-2258.

J45, Molinari M., Savadkoohi, A.T., BURSI O.S., Friswell M.I. and Zonta, D., "Damage identification of a 3D full scale steel-concrete composite structure with partial-strength joints at different pseudo-dynamic load levels", Earthquake Engineering & Structural Dynamics , 38(10), 2009, 1219-1236.

J46, Pipinato A., Molinari M., Pellegrino, C., BURSI O.S., Modena, C., "Fatigue assessment of a railway riveted steel bridge", (in print) Structure and Infrastructure Engineering , DOI: 10.1080/15732470903099776, 2009, 1-14.

J47, Pipinato A., Pellegrino, C., BURSI O.S., Modena, C., "High-cycle fatigue behavior of riveted connections for railway metal bridges", Journal of Constructional Steel Research , 65(12), 2009, 2167-2175.

J48, Savadkoohi, A., Molinari M., BURSI O.S., Friswell M.I., "Finite Element Model Updating of a Semi-Rigid Moment Resisting Structure", Structural Control and Health Monitoring , 18, 2011, 149-168

J49BURSI O.S., Stoten D.P., Tondini N., Vulcan L., "Stability and accuracy analysis of a discrete model reference adaptive controller without and with time delay", International Journal of Numerical methods in Engineering , 82, 9, 2010, 1158-1179.

J50, Lamarche C., Tremblay R., Leger P., Leclerc M., BURSI O.S., "Comparison between real time dynamic substructuring and shake table testing techniques for nonlinear seismic applications", Earthquake Engineering and Structural dynamics , 39, 12, 2010, 1299-1320.

J51, Gracia J., Bayo E., Ferrario F., BURSI O.S., Braconi A., Salvatore W., "The seismic performance of a semi-rigid composite joint with a double-sided extended end-plate. Part I: Experimental research",Engineering Structures , 32(2), 2010, 385-396.

J52, Gracia J., Bayo E., Ferrario F., BURSI O.S., "The seismic performance of a semi-rigid composite joint with a double-sided extended end-plate. Part II: Seismic simulations", Engineering Structures , 32(2), 2010, 397-408.

J53 BURSI, O.S. Pucinotti, R. Ferrario, F. and Zandonini, R. "Post-earthquake fire resistance of steel-concrete composite beam-to-column joints: welded solutions", Costruzioni Metalliche , No. 2, 2010.

J54 Pucinotti, R., BURSI, O.S., Ferrario, F. and Zandonini, R. "Post-earthquake fire resistance of steel-concrete composite beam-to-column joints: bolted solutions", Costruzioni Metalliche , No. 3, 2010.

J55 BURSI, O.S., JIA C., VULCAN, L., NEILD S.A. and WAGG, D. J., "Rosenbrock-based algorithms and subcycling strategies for real-time nonlinear substructure testing", Earthquake Engineering & Structural Dynamics, 40, 1, 2011, 1-19.

J56 BURSI, O.S. HE L., LAMARCHE C.P. and BONELLI A., "Linearly implicit time integration methods for real-time dynamic substructure testing", Journal of Engineering Mechanics,136, 2010, 1380-1389.

J57 Jia C., BURSI, O.S., Bonelli A. and Wang Z., "Novel partitioned integration methods for DAE systems based on L-stable linearly implicit algorithms", Int. Journal for Numerical Methods in Engineering, 2011, DOI 10.1002/nme.3153

J58, Pucinotti R., BURSI O.S., Demonceau, J.-F., "Post earthquake fire and seismic performance of welded steel-concrete composite beam-to-column joints ", Journal of Constructional Steel Research , 2011, DOI: 10.1016/j.jcsr.2011.03.006

J59, Zanon G., Kumar A., BURSI O.S., Ferrario F., Giacobbe A., "High strength tubular columns and connections under earthquake, fire loading and fatigue", Metallurgia Italiana , 3, 2011, 25-31

J60, Pucinotti R., BURSI O.S., Franssen J-M., Lennon T., "Seismic-induced fire resistance of composite welded beam-to-column joints with concrete-filled tubes", Fire Safety Journal , 46, 2011, 335-347, DOI: 10.1016/j.firesaf.2011.05.003.

J61 BURSI, O.S., Ceravolo, R., Erlicher, S., Zanotti Fragonara, L., "Identification of the hysteretic behaviour of a partial strength steel-concrete moment-resisting frame structure subject to pseudo-dynamic tests",Earthquake Engineering & Structural Dynamics, 41,14,2012, 1883-1903.

J62 BURSI, O.S., Pucinotti, R., Zanon, G., "Design of hollow steel joints and structures" (in Italian), Flaccovio , September 2012 | ISBN: 978-88-579-0158-9.

J63 BURSI, O.S., Wang, Z. Jia, C. and Wu, B. "Monolithic and partitioned time integration methods for real time heterogeneous simulations", Computational Mechanics , 52,1, 2013, 99-119.

J64 Wu, B., Wang. Z., BURSI, O.S., "Actuator dynamics compensation based on upper bound delay for real-time hybrid simulation", Earthquake Engineering & Structural Dynamics, 42,12,2013, 1749-1765.

J65 BURSI, O.S., Ceravolo, R., Kumar, A. and Abbiati, G., "Identification, model updating and validation of a steel twin deck curved cable-stayed footbridge", Computer-Aided Civil and Infrastructure Engineering, Guest Editors: O.S. Bursi, M.Q. Feng and Z. Wu, Vol. 29, No. 9, 2014.

J66 BURSI, O.S., Abbiati, G., Reza M.S., A Novel Hybrid Testing Approach for Piping Systems of Industrial Plants. Smart Structures and Systems, Vol. 14, No. 6, 2014.

J67 Wu, B., Wang. Z., BURSI, O.S., Xu, G. Yong, D. An Effective Online Delay Estimation Method Based on a Simplified Physical System Model for Real-time Hybrid Simulation, Smart Structures and Systems, Vol. 14, No. 6, 2014.

J68 Basu B., BURSI, O.S., Casciati F., Casciati S., Del Grosso A., Domaneschi M., Faravelli L., Holnicki-Szulc J., Irschik H., Krommer M., Lepidi M., Martelli A., Ozturk B., Pozo F., Pujol G., Rakicevic Z., and Rodellar J., An EACS joint perspective. Recent studies in civil structural control across Europe. Structural Control and Health Monitoring, Vol. 21, No. 12, 2014, 1414-1436.

J69 Reza, M. S., BURSI, O.S., Paolacci, F. and Kumar, A. "Performance of Seismically Enhanced Bolted Flange Joints for Petrochemical Piping Systems". Journal of Loss Prevention in the Process Industries , Vol. 30, 2014, 124-136.

J70 Tondini, N. BURSI, O.S., Bonelli, A. and Fassin, M., "Capabilities of a FBG sensor system to monitor the inelastic response of concrete sections in new tunnel linings subjected to earthquake loading",Computer-Aided Civil and Infrastructure Engineering, Guest Editors: O.S. Bursi, M.Q. Feng and Z. Wu, 2014, Vol. 30, No. 8, 2015

J71 BURSI, O.S., Reza, M.S., Abbiati, G. & Paolacci, F. "Performance-based earthquake evaluation of a full-scale petrochemical piping system". Journal of Loss Prevention in the Process Industries , Vol. 33, 2015, 10-22.

J72 Pucinotti, R., Tondini, N., Zanon, G & BURSI, O.S., "Tests and model calibration of high strength steel tubular beam-to-column and column-base composite joints for moment-resisting structures", Earthquake Engineering & Structural Dynamics, 2015, DOI: 10.1002/eqe.2547

J73 BURSI, O.S., "On the Advantages of Publishing in Top Ranked Academic Journals", Editorial in Computer-Aided Civil and Infrastructure Engineering, Vol. 30, No. 4, 2015, 245-246

J74 BURSI, O.S., "Introduction to the Special Issue: Health Monitoring of Structures", Guest Editors: O.S. Bursi, M.Q. Feng and Z. Wu, Computer-Aided Civil and Infrastructure Engineering, Vol. 29, Issue 9, October 2014, Page 643.

J75 BURSI, O.S., "Introduction to the Special Issue: Health Monitoring of Structures", Guest Editors: O.S. Bursi, M.Q. Feng and Z. Wu, Computer-Aided Civil and Infrastructure Engineering, Vol. 30, Issue 8, October 2015, Page 601.

J76 Hasan, M.R., Farazi, F., BURSI, O.S., Reza, M.S., D’Avanzo E. “A semantic-aware data management system for seismic engineering research projects and experiments”, International Journal for Advanced Research in Artificial Intelligence, Vol. 4, No. 4, 2015, 54-59.

J77 Abbiati, G., BURSI, O.S., Caperan P., Di Sarno, L., Molina, F.J., Paolacci, F. and Pegon, P., “Hybrid simulation of a multi-span RC viaduct with plain bars and sliding bearings”, Earthquake Engineering & Structural Dynamics, 2015, (in print), DOI: 10.1002/eqe.2580

J78 BURSI, O.S., Tondini, N., Fassin, M. and Bonelli A., "Structural Monitoring for the Cyclic Behaviour of Concrete Tunnel Lining Sections Using FBG Sensors", Structural Control and Health Monitoring, 2015, DOI: 10.1002/stc.1807.

J79 BURSI, O.S., Cazzador, E., Ussia, A., " Probabilistic analysis of a twin deck curved cable-stayed footbridge subjected to multiple inputs and corrosion ", Engineering Structures, Vol. 105, 15, 2015, 87-98

J80 BURSI, O.S., Paolacci, F., Reza, S., Alessandri, S., Tondini, N., " Seismic Assessment of Petrochemical Piping Systems Using a Performance-Based Approach ", Journal of Pressure Vessel Technology, 138(3), 2016, 10 pp, doi: 10.1115/1.4032111. 

J81 Carta, G., Movchan, A.B., Argani, L.P., BURSI, O.S., "Quasi-periodicity and multi-scale resonators for the reduction of seismic vibrations in fluid-solid systems", International Journal of Engineering Science, 109, 2016, 216-239.

J82 Xu, G., Wang, Z., Wu, B., BURSI, O.S., Tan, X., Yang, Q., Wen, L., Jiang, H.,"Pseudo-dynamic tests with substructuring of a full-scale precast box-modularized structure made of reinforced concrete shear walls", The Structural Design of Tall and Special Buildings, DOI: 10.1002/tal.1354, 2017

J83 BURSI, O.S., D’Incau, M., Zanon, G., Raso, S., Scardi, P., “Laser and mechanical cutting effects on the cut-edge properties of steel S355N”, Journal of Constructional Steel Research, 133, 2017, 181-191.

J84 Phan Nam H., Paolacci, F., BURSI, O. S., Tondini, N. “Seismic Fragility Analysis of Elevated Steel Storage Tanks Supported by Reinforced Concrete Columns”, Journal of Loss Prevention in the Process Industries. 47, 2017, 57-65

J85 BURSI O.S., Abbiati G., Cazzador, E., Pegon, P. and Molina, F.J., "Nonlinear heterogeneous dynamic substructuring and partitioned FETI time integration for the development of low-discrepancy simulation models", International Journal for numerical Methods in Engineering, DOI: 10.1002/nme.5556, 2017. 

J86 Xu, G., Wang, Z., Wu, B., BURSI, O.S., Tan, X., Yang, Q., Wen, L., Jiang, H., “Seismic Performance of Precast Shear Wall with Sleeves Connection Based on Experimental and Numerical Studies”, Engineering Structures, (in print), 2017.

J87 Mei, Z., Wu, B., BURSI, O.S., Yang, G., Wang Z., "Hybrid simulation of structural systems with online updating of concrete constitutive law parameters by unscented Kalman filter", Structural Control and Health Monitoring, (in print), 2017.

J88 Wang, Z., Wu, B., Xu, G., BURSI, O.S., "An Improved Equivalent Force Control Algorithm for Hybrid Seismic Testing of Nonlinear Systems", Structural Control and Health Monitoring, (in print), 2017.

J89 Abbiati, G., La Salandra, V., BURSI, O.S., Caracoglia, L. "A Composite Experimental Dynamic Substructuring Method Based on Partitioned Algorithms and Localized Lagrange Multipliers", Mechanical Systems and Signal Processing, 100, 1, 2018, 85-112

J90 Beltempo A., BURSI, O.S., Cappello, C., Zonta, D. and Zingales, M., A viscoelastic model for the long-term deflection of segmental prestressed box girders, Computer-Aided Civil and Infrastructure Engineering, Special Issue: Health Monitoring of Structures, Guest Editors: J.L. Beck, O.S. Bursi and M. Kurata, DOI:10.1111/mice.12333, Vol. 33, No. 1, 2017.

J91 BURSI, O. S., di Filippo R., La Salandra, V., Pedot, M. Reza, Md S., “Probabilistic seismic analysis of an LNG subplant”, Journal of Loss Prevention in the Process Industries, (in print), 2018.

J92 La Salandra, V., Wenzel, M., BURSI, O. S., Carta G., Movchan, A.B., “Conception of a 3D Metamaterial-Based Foundation for Static and Seismic Protection of Fuel Storage Tanks, Frontiers in Materials, 4, 30, October 2017, doi: 10.3389/fmats.2017.000302018.

J93 BURSI, O.S., Introduction to the Special Issue: Health Monitoring of Structures, Guest Editors: J.L. Beck, O.S. Bursi and M. Kurata, Computer-Aided Civil and Infrastructure Engineering, DOI:10.1111/mice.12333, Vol. 33, Issue 1, 2017, (in print).

 In summary: 93 papers published, 82 of which published in international journals, 6 in national journals, 4 on books and 1 book.

Reports

Rl BURSI, O. e MODENA, C. "Valutazione di Caratteristiche Spettrali, di Durata e Intensità di Accelerogrammi: Metodologia, Programma di Calcolo e Applicazioni a Registrazioni del Frinii (1976) e dell'Irpinia (1980)", Internal Report 6/88, Istituto di Scienza e Tecnica delle Costruzioni Università di Padova, September, 1986.

R2 BAREL, S., BERNARDINI, A-, BURSI, O. e MODENA, C. "Analisi Stocastica della Risposta di Sistemi Lineari ad Eccitazioni Sismiche a più Componenti in Regime Stazionario e Transitorio - Metodologia e Programma di Calcolo" Internal Report, Istituto di Scienza e Tecnica delle Costruzioni Università di Padova, December, 1986.

R3 BURSI, O. "Determinazione dei Domini di Stato Limite di Travi con Vincoli d'Estremità Cedevoli e Rappresentazione del Comportamento di Giunti Trave-Colonna in Acciaio" Internal Report, Dipartimento di Ingegneria, Università di Trento, March, 1987.

R4 BURSI, O. "Tests and Modeling of Bolted Double Clip Angles ofSteel Bracing Con-nections", Internal Report, Dipartimento di Meccanica Strutturale e Progettazione Automatica, Università di Trento, October, 1990.

R5 BURSI, O. "Behaviour and Modelling of Semi-Rigid Beam-to-Column Steel Joints", Contratto SPRINT RA 351, Technical Report N. 2, October, 1992.

R6 BURSI, O.S. e altri "Collegamenti Semirigidi nelle Costruzioni in Acciaio", Con­tratto SPRINT RA 351 bis, Final Report, October, 1995.

R7 BURSI, O.S., BONELLI, A. e LEONELLI, L. "Analisi Strutturale Termomeccanica su Suscettore di 20" in Grafite e Composito di Carbonio", Contratto di Ricerca 28.01.98 (Classified), Intermediate Results, October, 1998.

R8 BURSI, O.S., BONELLI, A. e LEONELLI, L. "Analisi Strutturale Termomeccanica su Suscettore di 20" in Grafite e Composito di Carbonio", Contratto di Ricerca Riservato 28.01.98 bis, Intermediate Results, December, 1998.

R9 BURSI, O.S., BONELLI, A. e LEONELLI, L. "Analisi Strutturale Termomeccanica su Suscettore di 20" in Grafite e Composito di Carbonio", Contratto di Ricerca Riservato 28.01.98 bis, Final Results. March, 1999.

R10 SUN, F. and BURSI, O.S. "Displacement-based and Mixed Formulations for Steel-concrete Composite Beams with Shear Lag", Internal Report, N. 21, Dipartimento di Ingegneria Meccanica e Strutturale, Università di Trento, December, 2002.

R11 BONELLI, A. and BURSI, O.S. " Seismic qualification of cast-in channels and shear connector devices between steel and concrete", Contract No. HPRI-CT-1999-40006. Cooperative advancements in seismic and dynamic experiments - EUROPEAN UNION, September, 2003.

R12 BURSI, O. S. , Caramelli S., Fabbrocino G., Molina J., Salvatore W., Taucer F., "3-D Full-scale Seismic Testing of a Steel-concrete Composite Building at Elsa", Contr. No: HPR-CT-1999-00059, Eur Report 21299 EN , 2004.

R13 BURSI, O. S. , Molina J., Salvatore W., Taucer F., "Dynamic characterization of a 3-D full scale steel-concrete composite building at ELSA", Contr. No: HPR-CT-1999-00059, Eur Report 21206 EN , 2004.

R14 Plumier, A., Castiglioni, C., Calado, L., BURSI, O. S., Vayas, I., Demarco, T., "Two Innovations for Earthquake Resistant Design" Final Report, The INERD project, CEC Agreement No. 7210-PR-316, Research Fund for Coal and Steel - European Union ., 2004.

R15 BURSI, O. S. , COLOMBO A.,"Prefabricated Composite Beam-to-Column Filled Tube or Partially Reinforced-Concrete Encased Column Connections for Severe Seismic and Fire Loadings", Mid-Term Report, PRECIOUS Project, Contr. No: RFS-CR-03034, Research Fund for Coal and Steel , 2006.

R16 BURSI, O. S. , et. al.,"Prefabricated Composite Beam-to-Column Filled Tube or Partially Reinforced-Concrete Encased Column Connections for Severe Seismic and Fire Loadings", Final Report, PRECIOUS Project, Contr. No: RFS-CR-03034, Research Fund for Coal and Steel , 2008.

R17 BURSI, O. S. , Dusatti T., Pucinotti R., "A Reconnaissance report. The April 6, 2009, L’Aquila Earthquake. Italy", Report, http://www.reluis.it, 2009.

R18 BURSI, O. S. , Kumar A. et al., "Design and Integrity Assessment of High Strength Tubular Structures for Extreme Loading Conditions" Mid-Term Report, HITUBES Project, Contr. No: RFSR-CT-2008-00035, Research Fund for Coal and Steel , 2010.

R19 Jaspart J-P., Demonceau J-F., BURSI, O. S. et al., "Performance-based approaches for high strength tubular columns and connections under earthquake and fire loadings" Mid-Term Report, ATTEL Project, Contr. No: RFSR-CT-2008-00037, Research Fund for Coal and Steel , 2010.

 

R20 Karamanos, S. BURSI, O. S. et al., "Structural safety of industrial steel tanks, pressure vessels and piping systems under seismic loading" Mid-Term Report, INDUSE Project, Contr. No: RFSR-CT-2009-00022, Research Fund for Coal and Steel , 2011.

R21 BURSI, O. S. et al., "Report on the Whole Simulation Tests and the Calibration and Validation of the Theory of Seismic Failure" Deliverable Report, MONICO Project, "Fibre Optics-Based Intelligent Monitoring and Assessment System for Proactive Maintenance and Seismic Disaster Prevention in Reinforced Concrete Tunnel Linings", Contr. No: FP7 – SME – 2007 – 1, Research for SMEs, 2011.

R22 BURSI, O. S. O.S., Ferrario F, Pucinotti R., Tondini N. and Zandonini R. "Test and analysis of structures and joints for steel-concrete moment-resisting frames and steel-concrete box-girder bridges", Deliverable Report, RELUIS Project, "The development of innovative approaches for the design of steel and composite steel-concrete structural systems", Line 5 of the RELUIS-DPC 2005-2008 project. Mazzolani F.M. and Zandonini R., Editors. Doppiavoce, Napoli. 2011.

R23 BURSI, O. S. , Kumar A. et al., "Design and Integrity Assessment of High Strength Tubular Structures for Extreme Loading Conditions", Final Report, HITUBES Project, Contr. No: RFSR-CT-2008-00035, Research Fund for Coal and Steel , 2011. 

R24 , Jaspart J-P., Demonceau J-F., BURSI, O. S. et al., "Performance-based approaches for high strength tubular columns and connections under earthquake and fire loadings" Final Report, ATTEL Project, Contr. No: RFSR-CT-2008-00037, Research Fund for Coal and Steel , 2011.

R25 , Fardis M., BURSI, O. S. et al., "Seismic Engineering Research Infrastructures for European Synergies" Final Report, SERIES Project, Contr. No: 227887, Capacities Specific Programme Research Infrastructures. 

R26 , Paolacci F., BURSI, O. S. et al., "3-D Assessment of the seismic vulnerability of an old RC viaduct with frame piers and study of the effectiveness of base isolation through PsD testing (RETRO)”, Eur Report 26471 EN , 2014. JRC., European Union.

R27 BURSI, O. S., Reza S. et al., "Component Fragility Evaluation, Seismic Safety Assessment and Design of Petrochemical Plants Under Design-Basis and Beyond-Design-Basis Accident Conditions”, Mid-Term Report, INDUSE-2-SAFETY Project, Contr. No: RFS-PR-13056, Research Fund for Coal and Steel , March, 2016.

In summary: 27 reports published. 6 internal reports; 15 reports for contracts with the European Union and 6 reports for contracts with Industry.